Are you looking to do some heavy-duty towing with full sized truck, van or utility vehicle? Then you need a heavy-duty trailer hitch that can get the job done. The Draw-Tite Ultra Frame Trailer Hitch is up to the challenge. This frame hitch is designed for full-sized long wheel based trucks and vans, as well as utility vehicles with heavy-duty suspensions. These hitches’ strong and secure side bracket design, heavy-duty all frame attachment and solid all-welded construction makes it ideal for marine and commercial use.
We recently installed the Draw-Tite 41926 Ultra Frame Trailer Hitch on a Ford E-150 Econoline Van. The owner of the Econoline needed a hitch with extra towing capacity to tow his large boat. The OEM hitch had an inadequate gross trailer weight capacity and an upgrade to the Draw-Tite hitch was necessary to ensure safe and secure operation.
The OEM frame hitch was rated for a 5,000 lbs. max. gross trailer weight and 500 lbs. max. tongue weight in a weight carrying (WC) configuration and in a weight distributing (WD) configuration it is rated for 10,000 lbs. max. gross trailer weight and 1,000 max. tongue weight.
In comparison, the Draw-Tite Ultra Frame hitch has a much higher capacity. This hitch has a max. gross trailer weight which is rated up to 10,000 lbs. and 1,000 lbs. tongue weight for a weight carrying (WC) configuration or up to 12,000 lbs. max. gross trailer weight and 1,200 lbs. max. tongue weight in a weight distribution configuration.
When placed side-by-side, the differences between the OEM frame hitch and the Draw-Tite Ultra Frame hitch are not apparent. However, the extra weight capacity of the Draw-Tite Ultra Frame has the strength necessary to pull the customer’s large marine craft.
These hitches feature a 2 inch square receiver tube and an E-coat base with a black powder finish. Custom built to manufacturer and model year specifications, these hitches will fit your vehicle perfectly for top towing performance that can withstand the toughest road abuse.
Installation of the Draw-Tite Ultra Frame trailer hitch is fairly simple and only takes about 30 minutes. Installation does not require drilling or any special tools.
The Draw-Tite 41926 Ultra Frame Trailer Hitch fits the following vehicles:
2000 – 2011 Ford E-150 Econoline full sized vans- 2000 – 2011 Ford E-250 Econoline full sized vans & Super Wagons
- 2000 – 2011 Ford E-350 Econoline full sized vans
Buy a Draw-Tite Ultra Frame Trailer Hitch from Truckspring.com, your source for towing and coupling products.
Draw-Tite Ultra Frame
- Part #: 41926 Buy online at Truckspring.com or call 1-800-358-4751.
Draw-Tite’s Max-Frame Class III/IV Round Tube Receiver Hitch 75788 for the 2014 Silverado and Sierra trucks are designed to complement your vehicle’s rugged good looks and blend elegantly into its overall appearance.
Built with solid welded construction for maximum strength and durability, it is backed by a Nationwide Limited Lifetime Warranty. The Draw Tite 75788 hitch E-Coat base with black powder coat finish is designed to withstand road abuse yet retain its attractive appearance for years to come.
Rated at up to 6,000 lbs. gross trailer weight (GTW) weight carrying (WC) and up to 9,000 lbs. gross trailer weight GTW) with weight distributing (WC) it features easy, bolt-on installation with no welding required.
The Draw Tite 75788 hitch comes complete with all necessary hardware and installation instructions to allow for a simple installation.
Features:
- 2 inch square receiver tube opening
- Neat appearance, all frame attachments
- E-Coat base with black powder coat finish
- Custom built according to manufacturer and model year
- Solid all-welded construction for maximum strength and safety
- Designed to withstand road abuse within specified capacities
- Backed by a Nationwide Limited Lifetime Warranty
So get the Draw Tite 75788 receiver hitch for your Silverado or Sierra and get towing. You can order by calling 1-800-358-4751.