The Firestone Ride-Rite Air Command Kit 2556 for Android allows you to remotely adjust the amount of air in your Firestone air helper springs at the push of a button by conveniently turning your smartphone into the controller.
The kit includes a Light Duty air compressor, Electronic Control Unit (ECU), wire harness, relay, exhaust valve, airline and instructions for downloading the Firestone Ride-Rite Air Command app for Android.
The Android app works as the controller to provide an instant air source while delivering convenient adjustability to the air helper springs.
The Firestone Android Air Command kit is easy to install, convenient and puts the power of air in the palm of your hand.
- Quick and easy installation
- No wires inside the vehicle
- Provides an easy and convenient air source solution
- Bluetooth technology for secure wireless interaction
- Adjust the height of your vehicle up to 25 feet away
- Compatible with Android smartphones and tablets
Put your Android smartphone to use to control the power of air with the Firestone 2556 Ride-Rite Air Command Kit from TruckSpring.com. Call 1-800-358-4751 to order or order online at the link above.
New from Hellwig are two new sway bars for the 2014 Ram 2500 pickup. The Hellwig 7306 is designed for the rear and is 1-1/4 inch in diameter and fits 2 and 4 wheel drive models with rear coil springs.
The Hellwig 7741 is designed for the front and is 1-3/8 inch in diameter and fits 4 wheel drive models with rear coil springs. Both are made from high quality hot formed and heat treated 4140 chrome poly spring steel.
Hellwig sway bars reduce body roll so you benefit from better vehicle control and greatly improved cornering traction for safer driving and turning capabilities. They feature fast, easy, "Bolt-on" installation with simple hand tools and include polyurethane bushings. Hellwig sway bars have a greater surface area than the typical factory sway bar, which gives it better roll resistance.
Hellwig sway bars are heat formed and coined as one piece to insure they will be the most durable, strongest and that they will be the most resistant to form alteration, important factors to consider in an anti-sway bar.
So if you want better control of your 2014 Ram 2500, upgrade to a Hellwig sway bar from TruckSpring.com.
Steel shackles are heavy and attaching them to your vehicle can be difficult at best. You may also have to carry different sizes to fit different vehicles or applications. BubbaRope now offers a better solution, The Gator Jaw soft shackle.
Made from Plasma rope which is the highest strength synthetic rope available, Gator-Jaw shackles are stronger than comparable steel shackles. Rated at up to 32,000 pounds break strength, they are perfect for off-road, marine, agricultural and many other uses.
Unlike steel shackles, the Gator-Jaw soft shackle won’t rust and are so light they float. No more losing your shackle in the water or muck. Its flexible design a makes it easy to fit even the most difficult pulling point and the one piece design means no more pins to fasten.
Easy to use
Just open the Gator-Jaw shackle by loosening and slipping off the loop over knot and then thread the soft shackle through the eye of your Bubba Rope or strap and through the tow point. Loop the Gator-Jaw eye back over knot and pull to tighten. What could be easier?
So ditch your old steel shackle and get a Gator-Jaw soft shackle from TruckSpring.com today. Order online at TruckSpring.com or call one of our towing specialists at 1-800-358-4751.
Hey Silverado and Sierra pickup owners, have you been waiting for a rear sway bar for your 2014 truck? Hellwig has your answer: the Helllwig 7735 sway bar works on both 2WD and 4WD Silverado and Sierra trucks and features a 1-1/8 inch heat treated 4140 chromoly sold steel bar.
The solid steel bar is heat treated to a tensile strength of 180,000 psi to insure outstanding performance and long lasting durability under the severest conditions. Bar and brackets are powder coated for durability and good looks.
Features:
- Easy installation with no drilling required
- Adjustable for desired amount of sway control and handling
- Polyurethane bushings
- Includes all necessary hardware
- Lifetime guarantee
- Made in the USA
Hellwig Heavy Duty Sway Bars provide added sway control when hauling heavy loads or towing and greatly improves cornering traction for safer driving and better handling. So upgrade your Silverado or Sierra pickup today with a quality rear sway bar from Hellwig. Order online at TruckSpring.com or call 1-800-358-4751.
(Sway Bar 7735 will not work with lifted applications)
The new ReadyLift front leveling kit 66-1113 is designed to fit the Dodge Ram 2500/3500 4WD trucks with the new generation radius arm suspension.
The new kit provides up to 1.75 inches of front leveling lift using coil spring spacers which provides lifted clearance for up to 35 inch wheels and tires.
This kit also includes special designed welded steel front shock extensions with new hardware which means you do not have to buy longer front shocks.
Kit features:
- Easy bolt on installation, no modifications requires
- Tough black powder coated finish
- Heavy Duty welded steel front coil spring spacers
- Special design welded steel front shock extensions
- Keeps your factory ride
- Will never wear, break or fail
- Made and designed in the U.S.A.
The 66-1113 leveling kit is designed for use on the new radius arm Dodge Ram front suspension found on 2014 and up 2500 4WD trucks and 2013 and up 3500 4WD trucks. To better identify if your truck has the new suspension, the front shock will be outside of the coil spring.
So get your Ram truck front end up to the task with the new ReadyLift 66-1113 leveling kit at TruckSpring.com.
Want to add some additional light to your off road vehicle? Then the new WurtonScout 5-watt LED Off-Road Cube Lights are what you need. Engineered using the most advanced technology, they are unparalleled in quality and are designed for the demands of automotive, off-road and industrial markets.
Each Scout Cube Light comes with four 5-watt LED bulbs rated at 493 lumens per bulb. That adds up to a lot of light in a very small 3 inch square package and is available in three light patterns; flood, spot and diffused.
Each light cube is IP68 rated for dust and moisture ingress protection and has a 50,000 hour LED bulb life expectancy.
Available in single or two packs, they include an adjustable mounting bracket, stainless steel hardware and polycarbonate primary lens and are backed by a limited lifetime warranty.
The Scout Cube Light requires 10-30 volts DC operation and draw 1.2 amps per light.
Here is a set installed on an Argo ATV. at Michigan Truck Spring in Saginaw, MI
Before – replacing old halogen lights
On/Off switch and wiring installed
Completed job - Installed Wurton Scout 5-Watt LED Cube Lights
So light up the night with a set of Wurton Scout 5-Watt LED Cube Lights from TruckSpring.com.
Are you looking to do some heavy-duty towing with full sized truck, van or utility vehicle? Then you need a heavy-duty trailer hitch that can get the job done. The Draw-Tite Ultra Frame Trailer Hitch is up to the challenge. This frame hitch is designed for full-sized long wheel based trucks and vans, as well as utility vehicles with heavy-duty suspensions. These hitches’ strong and secure side bracket design, heavy-duty all frame attachment and solid all-welded construction makes it ideal for marine and commercial use.
We recently installed the Draw-Tite 41926 Ultra Frame Trailer Hitch on a Ford E-150 Econoline Van. The owner of the Econoline needed a hitch with extra towing capacity to tow his large boat. The OEM hitch had an inadequate gross trailer weight capacity and an upgrade to the Draw-Tite hitch was necessary to ensure safe and secure operation.
The OEM frame hitch was rated for a 5,000 lbs. max. gross trailer weight and 500 lbs. max. tongue weight in a weight carrying (WC) configuration and in a weight distributing (WD) configuration it is rated for 10,000 lbs. max. gross trailer weight and 1,000 max. tongue weight.
In comparison, the Draw-Tite Ultra Frame hitch has a much higher capacity. This hitch has a max. gross trailer weight which is rated up to 10,000 lbs. and 1,000 lbs. tongue weight for a weight carrying (WC) configuration or up to 12,000 lbs. max. gross trailer weight and 1,200 lbs. max. tongue weight in a weight distribution configuration.
When placed side-by-side, the differences between the OEM frame hitch and the Draw-Tite Ultra Frame hitch are not apparent. However, the extra weight capacity of the Draw-Tite Ultra Frame has the strength necessary to pull the customer’s large marine craft.
These hitches feature a 2 inch square receiver tube and an E-coat base with a black powder finish. Custom built to manufacturer and model year specifications, these hitches will fit your vehicle perfectly for top towing performance that can withstand the toughest road abuse.
Installation of the Draw-Tite Ultra Frame trailer hitch is fairly simple and only takes about 30 minutes. Installation does not require drilling or any special tools.
The Draw-Tite 41926 Ultra Frame Trailer Hitch fits the following vehicles:
2000 – 2011 Ford E-150 Econoline full sized vans- 2000 – 2011 Ford E-250 Econoline full sized vans & Super Wagons
- 2000 – 2011 Ford E-350 Econoline full sized vans
Buy a Draw-Tite Ultra Frame Trailer Hitch from Truckspring.com, your source for towing and coupling products.
Draw-Tite Ultra Frame
- Part #: 41926 Buy online at Truckspring.com or call 1-800-358-4751.
The new ReadyLift Jeep lift kit for the Jeep Wrangler features progressive wound coil springs to give 4 inches of front lift and 3 inches of rear lift and allow for up to 38 inch tires with 4.5 inch backspacing wheels or less for your 2007-2014 Wrangler.
The kit includes 1-3/4 - 5/16 inch heavy duty DOM tube steel control arms and a 3/16 inch plate steel rear track bar bracket to correct roll center and bushing alignment. Heavy duty extended length front and rear sway bar end links provide for uncompromising on road handling and maximum flexing qualities. Easy bolt-on installation requires no modifications and the tough silver and black powder coated finish will keep your lift kit looking good for years.
The Original Currie Johnny Joints are fully serviceable with a tough zinc plated finish to provide maximum articulation even in the most extreme flexing situations.
Longer shocks like the ReadyLIFT SST9000 CNC Machined Performance Shocks are required and heavy duty track bars (ReadyLIFT 77-6002 / 77-6003) are recommend.
So get the best short arm Jeep JK Wrangler system on the market today with the ReadyLIFT 49-6407 Off Road Suspension Max Flex Lift Kit, proudly engineered and made In U.S.A. You can order Ready-lift kits by calling Michigan Truck Spring at 1-800-358-4751.
Draw-Tite’s Max-Frame Class III/IV Round Tube Receiver Hitch 75788 for the 2014 Silverado and Sierra trucks are designed to complement your vehicle’s rugged good looks and blend elegantly into its overall appearance.
Built with solid welded construction for maximum strength and durability, it is backed by a Nationwide Limited Lifetime Warranty. The Draw Tite 75788 hitch E-Coat base with black powder coat finish is designed to withstand road abuse yet retain its attractive appearance for years to come.
Rated at up to 6,000 lbs. gross trailer weight (GTW) weight carrying (WC) and up to 9,000 lbs. gross trailer weight GTW) with weight distributing (WC) it features easy, bolt-on installation with no welding required.
The Draw Tite 75788 hitch comes complete with all necessary hardware and installation instructions to allow for a simple installation.
Features:
- 2 inch square receiver tube opening
- Neat appearance, all frame attachments
- E-Coat base with black powder coat finish
- Custom built according to manufacturer and model year
- Solid all-welded construction for maximum strength and safety
- Designed to withstand road abuse within specified capacities
- Backed by a Nationwide Limited Lifetime Warranty
So get the Draw Tite 75788 receiver hitch for your Silverado or Sierra and get towing. You can order by calling 1-800-358-4751.
Give your Ram 3500 truck the lift you always wanted with the Tuff Country 33118 or 33119 lift kit. Tuff Country suspension’s new 2013-2014 Ram 3500 3 inch lift kits are simple to install and priced right. The kits include front coil spring spacers and rear lift blocks to lift your truck and maintain that factory ride. A track bar relocation bracket keeps the front end in proper alignment while a drop pitman arm maintains correct steering geometry.
With four kits to choose from, Tuff Country has what you are looking for.
The Tuff Country 33118 kit includes front shock relocation brackets and does not require extended shocks.
The Tuff Country 33119 kit is available in two versions, without shocks or with SX8000 shocks.
All four Ram 3500 3 inch lift kits allow you to fit up to 35 inch tires and gives additional fender clearance. So get your truck up to the task with a Tuff Country lift kit from TruckSpring.com today or call 1-800-358-4751.