FlexiRide Torsion Half Axles | Adjustable | 5-4.5 Inch Bolt Circle Hubs | 2,000 lbs. Capacity

SKU FF-200B-2

FlexiRide Adjustable Torsion Half Axles FF-200 B-2 feature 5-4.5 inch bolt circle hubs and are designed for small trailers and trailers that need a low center of gravity at the center of the frame. Fully assembled with hubs, bearings and seals mounted. Includes lug nuts. Torsion axle built with camber. Spindles are adjustable, removable and replaceable. 2,000 lbs. per pair capacity. Sold as a pair.

Read Reviews

Ships Today

$484.33

Qty Spin Up Spin Down * *

Product Specifications

Arm Type:Adjustable
Axle Capacity:2,000 lbs.
Bolt Length:4.5 inches
Number of Bolts:5

3 In Stock
In Stock Orders received before 1pm EST Monday - Friday are shipped same day!

Related Products

$25.00

$13.90

FlexiRide Base Plate | 1,400 lbs., 2,000 lbs. Half Axles

2 In Stock

Product Specs for UCF FF-200 B-2

Arm Type:Adjustable
Axle Capacity:2,000 lbs.
Bolt Length:4.5 inches
Number of Bolts:5
Wheel End:Without Brakes
Note:
Includes 2 Axles
Dimensions
Instructions: Click to View Installation Instructions.
MPN: FF-200 B-2

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

UCF FF-200 B-2 Details

FlexiRide Half Axles are perfect for light duty trailers like boat, camper, motorcycle and specialty trailers that need a low center of gravity at the center of the frame. The units feature simple bolt-on installation and easy alignment. Capacity ranges from 425 to 7,000 lbs. to fit just about any application and are available in various hub, drum and brake configurations.

FlexiRide half axles are one of the lightest suspension systems on the market.
Fits industry standard components
Capacity ranges from 425 lbs. to 7,000 lbs.
The compactness of the rubber cartridge allows for the narrowest track centers in the industry

FF-200 B-2 Replacement Parts Listing

Grease Seal - DL220
Bearing Cones - L44649
Bearing Races - L44610
Spindle Nut - FS5-1
Spindle Washer - FS12-2
Dust Cap - FS6-2
Rubber Plug - FS15-1
Wheel Hub 5x4.5" - 88545-5

Customer Q&A - UCF FF-200 B-2

Ask A Question

Looking at mounting this axle to a teardrop trailer. The frame will be 2x2 .120 wall. Can I weld the mounting plates to a 2x2 .120 cross member, or do I need something wider or heavier? Appreciate the advice!

Asked September 4, 2018

Charles

We spoke with The Universal Group on the frame requirements for welding the Flexiride base plates. 2 X 2 square tubing with .120" wall will be fine for the 2000 lb application. They advised "The base plate point is to be welded to the trailer frame. For the 2000 lbs capacity, that frame is likely to be made of 2.5 x 2.5 x .125", but 2 x 2 x 0.125" square tubing will be fine for welding. The actual rigidity of the frame made of 2 x 2" tube depends on the construction of the frame itself"

UCF

UCF Warranty

1 Year Limited Warranty

UCF warrants its products against defects in workmanship or material for a period of 1 year.

What the warranty does not cover

Corrosion. Damage due to impact, accident, misuse, overloading or improper installation.

How to get service

If a UCF product fails as a result of a manufacturer defect, contact us at Michigan Truck Spring for support. You can contact us by phone at 1-800-358-4751 or by using our contact form.