Lunette Ring | Draw-Tite | 2-1/2 Inch Diameter | 4 Hole Base

SKU 63023

Draw-Tite 4 Bolt Flange Lunette Ring, 2-1/2 Diameter, 42,000 lbs. Capacity. Center-to-center dimensions: 4-1/2 inches vertical, 4-1/2 inches horizontal. Include 4 bolts, lock washers and hex nuts.

Read Reviews

$123.37

Qty Spin Up Spin Down * *

Product Specifications

Capacity:42,000 lbs.
Instructions:Draw-Tite 63023 Instructions

2 In Stock

Draw-Tite 4 Bolt Flange Lunette Ring, 2-1/2 Diameter, 42,000 lbs. Capacity. Center-to-center dimensions: 4-1/2 inches vertical, 4-1/2 inches horizontal. Include 4 bolts, lock washers and hex nuts.

Product Specs for Draw-Tite 63023

Capacity:42,000 lbs.
Instructions:Draw-Tite 63023 Instructions
UPC: 742512630237
MPN: 63023

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

Draw-Tite 63023 Details

Lunette Ring - 63023

4 Bolt Flange Lunette Ring with 2-1/2" Diameter and 42,000 lbs. Capacity.

Heavy duty design
Forged alloy steel
Black powder coat finish
Includes 4 – 5/8” bolts, lock washers, and hex nuts
Works with all pintle hook and mounting plates.

Dimensions center-to-center:

Vertically: 4-1/2 inches
Horizontally: 4-1/2 inches

Customer Q&A - Draw-Tite 63023

Ask A Question

What is the bolt partter center to center?

Asked August 2, 2017

Marco

The distance between mounting holes center to center is 4-1/2 inches.

We are in need of a ring with minimum 20 ton capacity, bolt holes need to be 4.5inches to center top to bottom and side to side. but the bolt hole sizes need to be 3/4". All we have found are 5/8". If you could please point me towards the correct product or tell me if this works, thank you.

Asked September 21, 2016

Brandon

We recommend looking at part DB-060FQ1 on our website. Feel free to call us at 1-800-358-4751 if you have any questions.

what is the bolt hole spacing i am looking for a ring with 3.5 inch side to side and 3.5 inch top to bottom

Asked March 11, 2014

Dave

Lunette ring 63023 has a center bolt to center bolt diameter of 4.5 inches side to side and top to bottom. We do not offer a lunette ring with 3.5 inch center bolt to center bolt.

Draw-Tite

Draw-tite is the leader in trailer hitches, ball mounts, and trailer towing products. Over fifty years and millions of trailer hitches later, Draw-tite’s 500 dedicated employees put the same care and patience into every hitch they build today as Bill Whichello did fifty years ago. Draw-Tite also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles. The basis of Draw-tites continued success is that Draw-Tite trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Draw-Tite Warranty

1 Year Limited Warranty

All Draw-Tite products have at least a 1 Year Limited Warranty.

Some products have longer warranty coverage periods. This coverage is item by item and you should review the warranty information included.

What the warranty does not cover

Normal wear and tear over time, damage from abuse or neglect, and damage resulting from accidents is not covered. Improper installation including welding will void any warranty.

Any alteration of products beyond the included installation instructions will void the warranty.

You can view the full details of Draw-Tite’s warranty here.