Pintle Hook | Draw-Tite | 10 Ton | 20,000 lbs.

SKU 63014

Draw-Tite 10 Ton Pintle Hook (Including Grade 8 Hardware) Rating 20,000 lbs. (GTW), 4,000 lbs. (VL), Black

$84.75

Qty Spin Up Spin Down * *

Product Specifications

Pintle Hook Type:Standard
Max Vertical Load:4,000 lbs.
Max Gross Trailer Weight:20,000 lbs.
Mount Type:Rigid Mount Bolt On

1 In Stock

Draw-Tite 10 Ton Pintle Hook (Including Grade 8 Hardware) Rating 20,000 lbs. (GTW), 4,000 lbs. (VL), Black

Related Products

$25.01

$18.22

Pintle Hook Hardware Mounting Kit | Draw-Tite

Typically ships in 2-3 weeks.

$8.39

$5.38

Snapper Pin Replacement | Draw-Tite

4 In Stock

Product Specs for Draw-Tite 63014

Pintle Hook Type:Standard
Max Vertical Load:4,000 lbs.
Max Gross Trailer Weight:20,000 lbs.
Mount Type:Rigid Mount Bolt On
Instructions:Draw-Tite 63014 Installation Instructions.
UPC: 742512630145
MPN: 63014

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

Draw-Tite 63014 Details

10 Ton Pintle Hook

Includes Grade 8 Hardware
Rating 20,000 lbs. (GTW)
4,000 lbs. maximum vertical load
Black powder coat finish

Customer Q&A - Draw-Tite 63014

Ask A Question

Will this fit on factory OEM pintle bolt holes on back bumper of 2006 toyota landcruiser?

Asked September 24, 2014

js202403

The Tow Ready Pintle Hook 63014 has the following mounting hole dimensions: 3-3/8 inches wide (center to center) 1-3/4 inches up / down (center to center) 17/32 inch bolt hole diameter We are not familiar with the OEM holes on the back bumper of the 2006 Landcruiser, so you will have to measure to verify they will line up.

Draw-Tite

Draw-tite is the leader in trailer hitches, ball mounts, and trailer towing products. Over fifty years and millions of trailer hitches later, Draw-tite’s 500 dedicated employees put the same care and patience into every hitch they build today as Bill Whichello did fifty years ago. Draw-Tite also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles. The basis of Draw-tites continued success is that Draw-Tite trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Draw-Tite Warranty

1 Year Limited Warranty

All Draw-Tite products have at least a 1 Year Limited Warranty.

Some products have longer warranty coverage periods. This coverage is item by item and you should review the warranty information included.

What the warranty does not cover

Normal wear and tear over time, damage from abuse or neglect, and damage resulting from accidents is not covered. Improper installation including welding will void any warranty.

Any alteration of products beyond the included installation instructions will void the warranty.

You can view the full details of Draw-Tite’s warranty here.