Pintle Hook Receiver Mount | Draw-Tite | Forged Shank | 25,000 lbs.

SKU 38186

Draw-Tite Titan 3 inch receiver pintle hook mounting plate, 9 inch shank, 9 x 5 inch plate size, 25,000/4,000 lbs.

$254.96

Qty Spin Up Spin Down * *

Product Specifications

Max Gross Trailer Weight:25,000 lbs.
Tongue Weight Capacity:4,000 lbs.
Mount Type:Trailer Hitch Mount
Receiver Tube Size3"

Typically ships in 2-3 weeks.

Draw-Tite Titan 3 inch receiver pintle hook mounting plate, 9 inch shank, 9 x 5 inch plate size, 25,000/4,000 lbs.

Product Specs for Draw-Tite 38186

Max Gross Trailer Weight:25,000 lbs.
Tongue Weight Capacity:4,000 lbs.
Mount Type:Trailer Hitch Mount
Receiver Tube Size3"
UPC: 016118072143
MPN: 38186

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

Draw-Tite 38186 Details

PINTLE HOOK MOUNT 38186

Converts receivers for use with pintle-type trailers, quickly and easily
Provides mounting for both ball and pintle and rigid type pintle hooks
Pin and clip must be ordered separately
Black power coat finish

Titan 3" Receiver Pintle Hook Mounting Plate with 9" Shank, 9" x 5" Plate Size, 25,000/4,000 lbs.

Shank (A) 9"
Length (B) 3-1/4"
Shank Diameter (H) 3"
Shank Height (C) 9"
Width (D) 5"
Hole (E) 17/32"
Width (F) 3-3/8"
Heigth (G) 1-3/4
Hole Sets: 5

Customer Q&A - Draw-Tite 38186

Ask A Question

Draw-Tite

Draw-tite is the leader in trailer hitches, ball mounts, and trailer towing products. Over fifty years and millions of trailer hitches later, Draw-tite’s 500 dedicated employees put the same care and patience into every hitch they build today as Bill Whichello did fifty years ago. Draw-Tite also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles. The basis of Draw-tites continued success is that Draw-Tite trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Draw-Tite Warranty

1 Year Limited Warranty

All Draw-Tite products have at least a 1 Year Limited Warranty.

Some products have longer warranty coverage periods. This coverage is item by item and you should review the warranty information included.

What the warranty does not cover

Normal wear and tear over time, damage from abuse or neglect, and damage resulting from accidents is not covered. Improper installation including welding will void any warranty.

Any alteration of products beyond the included installation instructions will void the warranty.

You can view the full details of Draw-Tite’s warranty here.