Suspension Lift Kit | Rough Country | 4 Inch | Jeep Wrangler

SKU RC68230

Rough Country 4 inch Suspension Lift Kit 68230 for the 4WD Jeep Wrangler increases ground clearance and levels the front with the rear of the vehicle. The kit features front and rear lifted coil springs, a track bar bracket and lower shock relocation brackets. The kit also includes front and rear Rough Country Premium N3 series shocks.

Read Reviews

$599.95 Free Ship!

Qty Spin Up Spin Down * *

Product Specifications

Lift Type:Coil Spring
Max Tire Size:35"
Recommended Tire Size35x12.50 R17
Note:Wheel Back Spacing: 4.5 - 4.75 inch
Replaces 862S

Typically ships in 1 business day.

Product Specs for Rough Country 68230

Lift Type:Coil Spring
Max Tire Size:35"
Recommended Tire Size35x12.50 R17
Note:Wheel Back Spacing: 4.5 - 4.75 inch
Replaces 862S
Instructions: Rough Country 68230 Installation Instructions.
Front Shock:(2) Premium N3 Series
Rear Shock:(2) Premium N3 Series
UPC: 843030171155
MPN: 68230

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

Rough Country 68230 Details

Features

Easy bolt-on installation
Increased ground clearance
Coil correction plates correct the rear coil angle 10 degrees and allow the rear coil springs to function more effeciently
Premium N3 series shocks

Kit Contents

Front

Lifted coil springs
Track bar drop bracket
Pitman arm
Brake line relocation brackets
Shock relocation brackets
Cam bolts
Hardware

Rear

Lifted coil springs
Extended sway-bar links
Coil correction plates
Track bar drop bracket
Brake line relocation brackets
Hardware

Shocks

(4) Premium N3 Series Shocks

Installation Notes:

Fits 2-Door models only
Recommended Wheel Backspacing 4.5" - 4.75"
Does NOT fit 4-door (Unlimited) models.
2012 and newer models require exhaust modification to clear front drive shaft (#1030)
On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

Vehicle Application Guide for Rough Country 68230

The RC68230 Suspension Lift Kit | Rough Country | 4 Inch | Jeep Wrangler is engineered to work with specific vehicles displayed below. Can't find your vehicle, or need assistance, please give us a call at 1-800-358-4751 or 1-989-755-0561. Browse the category 4 Inch Lift Kits Lift Kits , Rough Country 4 Inch Lift Kits , Rough Country Lift Kits , to view all vehicle makes and models.

Year	Make	Model	Vehicle Option	Installation Notes
2007	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2008	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2009	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2010	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2011	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2012	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2013	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2014	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2015	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2016	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2017	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
2018	Jeep	Wrangler	Fits 2 Wheel Drive; Fits 4 Wheel Drive	Fits Wrangler JK 2 Door models only.Does NOT fit 4-door (Unlimited) models. 2012-up models require exhaust modifications (#1030) to clear the front driveshaft. On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

Customer Q&A - Rough Country 68230

Ask A Question

Rough Country

Rough Country Warranty

Limited Lifetime Warranty

On hard suspension components including knuckles, Lift Blocks, Control Arms, Jeep JK Armor, Bed Covers, Bed Mats, Nerf Steps, and Wheel Well Liners.

5 Year Limited Warranty

On leaf springs and coil springs.

3 Year Limited Warranty

On shocks and stabilizers.

3 Year Limited Warranty

On LED Lights, Fender flares, and Soft Tops.

2 Year Limited Warranty

On Winch mechanical components.

1 Year Limited Warranty

On Winch electrical components.

1 Year Limited Warranty

On All wear and tear items. Bushings, Ball Joints, Etc.

Rough Country products are warranted to be free from defects in material and craftsmanship for the time periods listed. Some suspension components are prone to gradual wear and tear over time and therefore are not covered within the Lifetime Replacement Warranty.

Warranty Guard

This free protection supplements your manufacturer's warranty, guaranteeing that if you are denied repair due to having a Warranty Guard protected product on your vehicle, then Rough Country will foot the bill for your repair! For up to 5 years / 100K miles / or until your manufacturer's warranty ends, if there is a failure of a factory warranty-covered part due to installation of a Rough Country suspension product, Rough Country will cover the repairs at a factory authorized shop - all you pay is a $100 deductible!

What the warranty does not cover

Wear and tear items such as mountings, bushings, diminished shock and stabilizer dampening resistance, finish, dents and scratches, as these components and issues can wear out or occur naturally over time. These items are covered under a separate Limited Warranty along with other non-suspension items listed above. Replacements for non-defective items broken during off-road use may incur shipping charges.

You can view the full details of Rough Country’s warranty here.