Drawbar | 10 Inch Long, 4 Inch Rise | 2,000 lbs.

SKU 3594

Draw Tite Class I Drawbar with 3/4 inch ball hole, 10 inch length and 4 inch rise for a 1-1/4 inch trailer hitch opening. Inlcudes drawbar, pin and clip.

Read Reviews

$35.82

Qty Spin Up Spin Down * *

Product Specifications

Class:I
Max Gross Trailer Weight:2,000 lbs.
Trailer Tongue Weight:200 lbs.
Receiver Tube Size1-1/4"

Typically ships in 2-3 weeks.

Draw Tite Class I Drawbar with 3/4 inch ball hole, 10 inch length and 4 inch rise for a 1-1/4 inch trailer hitch opening. Inlcudes drawbar, pin and clip.

Product Specs for Draw-Tite 3594

Class:I
Max Gross Trailer Weight:2,000 lbs.
Trailer Tongue Weight:200 lbs.
Receiver Tube Size1-1/4"
Length (A): 10 inches
Rise - B:4 inches
Drawbar Eye I.D:3/4 inch
Adjustable:No
Note:Includes drawbar, pin and clip.
Cannot be used in a drop position.
UPC: 742512035940
MPN: 3594

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

Draw-Tite 3594 Details

Draw Tite drawbars and ball mounts are constructed of the highest quality steel. Fits 1-1/4 inch x 1-1/4 inch Class I receiver style hitches. For use with Hidden Hitch, Reese and Draw-Tite Class I trailer hitches.

Class I drawbar applications are vehicle specific. The correct replacement drawbar part number is listed on each Class I hitch installation instruction sheet.

Length: 10 inches
Maximum Rise: 4 inches
Fits Class 1 1-1/4 inch receivers
2,000 lbs. gross trailer weight and 200 lbs. tongue weight
Includes drawbar, pin and clip

Customer Q&A - Draw-Tite 3594

Ask A Question

Draw-Tite

Draw-tite is the leader in trailer hitches, ball mounts, and trailer towing products. Over fifty years and millions of trailer hitches later, Draw-tite’s 500 dedicated employees put the same care and patience into every hitch they build today as Bill Whichello did fifty years ago. Draw-Tite also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles. The basis of Draw-tites continued success is that Draw-Tite trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Draw-Tite Warranty

1 Year Limited Warranty

All Draw-Tite products have at least a 1 Year Limited Warranty.

Some products have longer warranty coverage periods. This coverage is item by item and you should review the warranty information included.

What the warranty does not cover

Normal wear and tear over time, damage from abuse or neglect, and damage resulting from accidents is not covered. Improper installation including welding will void any warranty.

Any alteration of products beyond the included installation instructions will void the warranty.

You can view the full details of Draw-Tite’s warranty here.