Hitch Ball | 2-5/16 x 1-1/4 x 2-3/4 Inch | 20,000 GTW | Chrome

SKU 63840

Draw-Tite solid steel towing hitch ball 2-5/16 x 1-1/4 x 2-3/4, 20,000 GTW Chrome

$34.58

Qty Spin Up Spin Down * *

Product Specifications

Note:Hitch ball requires use with like rated receiver and ball mount. Consult tow vehicle owners manual for maximum towing capacities.
Capacity:20,000 lbs.
A - Ball Diameter:2-5/16 inches
B - Shank Diameter:1-1/4 inches

Typically ships in 2-3 weeks.

Draw-Tite solid steel towing hitch ball 2-5/16 x 1-1/4 x 2-3/4, 20,000 GTW Chrome

Product Specs for Draw-Tite 63840

Note:Hitch ball requires use with like rated receiver and ball mount. Consult tow vehicle owners manual for maximum towing capacities.
Capacity:20,000 lbs.
A - Ball Diameter:2-5/16 inches
B - Shank Diameter:1-1/4 inches
C - Shank Length:2-3/4 inches
Drawbar Thinkness Range:3/8 - 1 inch
UPC: 016118073188
MPN: 63840

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

Draw-Tite 63840 Details

Solid steel towing hitch balls are engineered to meet all safety requirements of VESC regulation V-5. Draw-Tite hitch balls are cold forged for superior strength.

The ball diameter required is stamped into the coupler handle or body. All hitch balls are built with wrench flats. Lock nut must be put on after lock washer.

Ball Diameter: 2-5/16"
Shank Diameter: 1-1/4"
Shank Length: 2-3/4"
Drawbar Thickness Range: 3/8"-1"
Rating: 20,000 lbs.
Finish: Chrome

Customer Q&A - Draw-Tite 63840

Ask A Question

Draw-Tite

Draw-tite is the leader in trailer hitches, ball mounts, and trailer towing products. Over fifty years and millions of trailer hitches later, Draw-tite’s 500 dedicated employees put the same care and patience into every hitch they build today as Bill Whichello did fifty years ago. Draw-Tite also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles. The basis of Draw-tites continued success is that Draw-Tite trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Draw-Tite Warranty

1 Year Limited Warranty

All Draw-Tite products have at least a 1 Year Limited Warranty.

Some products have longer warranty coverage periods. This coverage is item by item and you should review the warranty information included.

What the warranty does not cover

Normal wear and tear over time, damage from abuse or neglect, and damage resulting from accidents is not covered. Improper installation including welding will void any warranty.

Any alteration of products beyond the included installation instructions will void the warranty.

You can view the full details of Draw-Tite’s warranty here.