Receiver Extension | 14 Inch Long | 3,500 lbs.

SKU 80305

Draw-Tite trailer hitch receiver extension, extends a 2 inch square tube to a 2 inch square tube receiver 14 inches.

$69.62

Qty Spin Up Spin Down * *

Product Specifications

Receiver Tube Size2"
Max Gross Trailer Weight:3,500 lbs.
Length (A): 14"
FinishBlack Powder Coat

Typically ships in 2-3 weeks.

Draw-Tite trailer hitch receiver extension, extends a 2 inch square tube to a 2 inch square tube receiver 14 inches.

Product Specs for Draw-Tite 80305

Receiver Tube Size2"
Max Gross Trailer Weight:3,500 lbs.
Length (A): 14"
FinishBlack Powder Coat
UPC: 058914803057
MPN: 80305

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

Draw-Tite 80305 Details

Draw-Tite adapters are constructed of the highest quality steel.

2" receiver extension.

Maximum Trailer Weight is the lowest of:
-50% of the hitches listed rating.
-manufacturer's vehicle tow capacity.
-3500 lbs.

Maximum Tongue Weight is the lowest of:
-50% of the hitches listed tongue capacity.
-300 lbs

Black E-Coat Finish.

14 Inch Length (from pin hole to pin hole).

Customer Q&A - Draw-Tite 80305

Ask A Question

Can I use this extension with a dual receiver extension

Asked July 8, 2017

We do not recommend using a extension with another extension. The extensions can only be put into the hitch itself.

Draw-Tite

Draw-tite is the leader in trailer hitches, ball mounts, and trailer towing products. Over fifty years and millions of trailer hitches later, Draw-tite’s 500 dedicated employees put the same care and patience into every hitch they build today as Bill Whichello did fifty years ago. Draw-Tite also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles. The basis of Draw-tites continued success is that Draw-Tite trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Draw-Tite Warranty

1 Year Limited Warranty

All Draw-Tite products have at least a 1 Year Limited Warranty.

Some products have longer warranty coverage periods. This coverage is item by item and you should review the warranty information included.

What the warranty does not cover

Normal wear and tear over time, damage from abuse or neglect, and damage resulting from accidents is not covered. Improper installation including welding will void any warranty.

Any alteration of products beyond the included installation instructions will void the warranty.

You can view the full details of Draw-Tite’s warranty here.